Answers are grounded in this paper and cite their sources.
In this study iron oxide nanoparticles were created as base fluid for improvement of heat transfer in a double pipe heat exchanger. Green fabrication of iron oxide nanoparticles was achieved using O. sanctum leaf extract and their structural and morphological properties were characterized using UV–Vis, FTIR and SEM analysis. The obtained 55 nm sized spherical nanoparticles were utilized to investigate the thermal behavior both with and without surfactant. Because of the aggregation of nanoparticles, the thermal conductivity of the nanofluid changed in relation to the experimental Maxwell model. Furthermore, at 30 °C, one volume % of nanoparticle enhanced the thermal conductivity by 0.835 W m−1K−1. When compared to water, the iron oxide–water nanofluid showed an impressive 39% increase in heat transfer. Additionally, it demonstrated an increased heat capacity and stable thermogravimetry with 40% remains of the synthesized nanoparticles. The process was accelerated by introducing nanofluid through the heat exchanger. The results showed improved heat transfer coefficients in the inner and outer pipe. The outcome of increased Reynolds number shows turbulent behavior due to nanoparticles, and a characteristic deviation was identified with water and nanofluid through increasing Nusselt number in conjunction with the Reynolds number.
No takes yet. Share an insight, caveat, or question.
Radha et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: