Answers are grounded in this paper and cite their sources.
As the consumer demand for smaller and more functional products increases, the challenges to Surface Mount Technology process also increases. In addition, transition to lead free solder paste and use of miniature components, has increased the complexity of the printing process. It has been proven that the lead free solder pastes do not spread or “wet” as well as tin lead solder pastes. Printings, being the first step in a surface mount process and the most complex one, has the reputation of introducing far more defects than any other process. This has pushed the manufacturer to implement some type of post-print inspection. Solder Paste Inspection (SPI) systems today includes both 2D (area) and/or 3D (volume) inspection. 2D and 3D inspection can exist within the printer or external to the printer. The impact on the overall process must be considered when implementing particular solutions for inspection. Factors that should be considered are, accuracy and repeatability, capability to evaluate all three Regions of Interests (ROI), cost of implementation, and speed. The three regions of interest (ROI) include the solder paste on the printed circuit board pad (both 2D and three 3D can be considered here), the region between the printed circuit board pads, and the region between the stencil apertures. This paper attempts to understand the correlation between a true 2D area measurement (e.g. printer) and a height map generated area from a SPI system. In addition, this paper will explore the correlation between area/volume between 2D/3D techniques. The ultimate goal is to arm the process engineers with information that can be used to make decision that will impact defects, cost, throughput and Return On Investment.
No takes yet. Share an insight, caveat, or question.
Haugen et al. (2008) studied this question.