Answers are grounded in this paper and cite their sources.
Using laser-based powder bed fusion (LB-PBF) to process H13 steel holds significant promise for fabricating advanced molds for applications in the automotive industry. In this study, a novel strategy involving elevated preheating temperatures was employed to enhance the fatigue properties of LB-PBF H13 steel, particularly in the as-built condition. Fatigue tests were conducted on specimens fabricated at 200°C and 500°C preheating temperatures, with non-destructive characterization techniques, including μ-CT, white light interferometry (WLI), and X-ray diffraction (XRD), employed to analyze surface roughness and residual stress. The results indicate that preheating at 500°C significantly enhances the fatigue performance compared with that at 200°C, particularly in the high-cycle regime for the as-built samples, despite a modest increase in surface roughness at 500°C. The improved fatigue life, ranging from 2 to 73 times greater, can be attributed primarily to the substantial reduction in residual stresses (from 487 MPa to 64 MPa). This reduction minimizes both the number and size of critical crack-initiating surface defects. Quantitative rationalization via Kitagawa-Takahashi (K-T) diagrams indicates a transition in fracture mechanisms, from multiple-surface crack initiation in the 200°C samples to single-surface initiation in the 500°C samples, due to reduced stress concentrations and modified crack propagation behavior. This study underscores the critical role of residual stress control over surface roughness in enhancing the fatigue performance of LB-PBF H13 steel, offering valuable novel insights for optimizing process parameters in the production of high-performance molds.
No takes yet. Share an insight, caveat, or question.
Qin et al. (2025) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: