Answers are grounded in this paper and cite their sources.
A compositionally graded alloy, transitioning from Ti-6Al-4V to Ti-35Nb-7Zr-5Ta, with nine intermediate compositions, was fabricated using laser-directed energy deposition, as a candidate system for stiffness-matched biomedical implants. This study focuses on microstructural evolution across layers and interfaces, while reducing the effects of thermal history - an aspect largely unexplored in prior investigations on graded alloys. Microstructural characterization of the as-deposited condition revealed a gradual transition from HCP α + BCC β phases near the Ti-6Al-4V end to a fully β phase near the Ti-35Nb-7Zr-5Ta end, consistent with XRD analysis and CALPHAD predictions. Post-processing β-solutionization and quenching led to a partial dissolution of the cellular structure, and a phase evolution from martensitic α’ to α” and eventually to a fully β microstructure, across the gradient from Ti-6Al-4V to Ti-35Nb-7Zr-5Ta. EBSD analysis indicated an absence of strong crystallographic texture, with β grains elongated along the build direction. Elastic modulus measurements exhibited a decreasing trend from 0% to 80% TNZT, followed by an increase toward the 100% TNZT composition. TEM investigations revealed the presence of metastable ω and O’ phases in the 80% and 100% TNZT layers, which may be the potential reason for this non-uniform trend in modulus.
No takes yet. Share an insight, caveat, or question.
Saji et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: