Answers are grounded in this paper and cite their sources.
A theoretical study is carried out to investigate the comprehensive effect of the machined roughness and fabricated textures, by solving the average Reynolds equation coupled with a mass-conservative cavitation algorithm and taking into account asperity contact. We analyzed the influence of surface roughness, which is represented by the combined root-mean-square roughness σ and surface pattern parameter γ on the optimum texture parameters including the dimple depth-over-diameter ratio and area density under hydrodynamic and mixed lubrication conditions. The results show that the effect of surface roughness on load-carrying capacity can be ignored under hydrodynamic lubrication condition. Furthermore, the optimum texture parameters under hydrodynamic lubrication condition and the optimum dimple depth-over-diameter ratio under mixed lubrication condition are determined at minimized friction coefficient, which can be taken as the same for smooth-textured surface and rough-textured surface. The corresponding minimum friction coefficient increases with increasing σ and γ, and decreasing dimple area density under mixed lubrication condition.
No takes yet. Share an insight, caveat, or question.
Ma et al. (2017) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: