Answers are grounded in this paper and cite their sources.
Computational modeling of open-channel flows at low Froude (F) numbers is often carried out using the rigid-lid assumption to prescribe the water surface location. However, the presence of wall-mounted hydraulic structures could cause F to locally exceed unity, inducing a transition from subcritical to supercritical flow, locally accelerate the flow generating high-energy turbulent eddies at a constriction region, and lead to the formation of backwater at upstream regions. Under such circumstances, the rigid-lid assumption may not be adequate to obtain reliable flow field simulations. Previous investigation to examine the effect of a rigid-lid assumption on large-eddy simulation (LES) of a low-Reynolds open-channel flow showed that the second-order turbulent statistics are altered depending on the free-surface resolving method. In this work, we seek to study the rigid-lid effect on high-Reynolds LES applicable to natural river flows. We employed an in-house Virtual Flow Simulator (VFS-Geophysics) model in its LES mode to simulate the flow field in a similar test case that is scaled up to obtain a high Reynolds of 7.9×104. We performed LES evaluating the two free-surface resolving approaches: rigid-lid and level-set. The flow field and free-surface computations were validated using a series of measured data that we obtained by carrying out laboratory experiments. Our LES results indicate that at near-bed regions of the flume and around the bridge abutment, both the first- and second-order turbulent statistics are influenced by the method selected to prescribe the water surface.
No takes yet. Share an insight, caveat, or question.
Khosronejad et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: