Key points are not available for this paper at this time.
High-performance, monolithic photoactivated gas sensors based on the integration of gas-sensitive semiconductor metal oxide nanowires on micro light-emitting diodes (μLEDs) are introduced. The μLEDs showed improved irradiance and energy conversion efficiency (i.e., external quantum efficiency, EQE), as the size of LEDs was reduced from 200 × 200 μm 2 (irradiance of 46.5 W/cm 2 and EQE of 4%) to 30 × 30 μm 2 (irradiance of 822.4 W/cm 2 and EQE of 9%). Gas-sensitive zinc oxide (ZnO) nanowires were directly synthesized on top of the μLED through a hydrothermal reaction. The direct contact between the sensing component and μLED sensor platform leads to high light coupling efficiency, minimizing power consumption of the sensor. Furthermore, the sensing performance (i.e., sensitivity) at optimal operating power was improved as the LED size was reduced. The smallest fabricated gas sensor (active area = 30 × 30 μm 2 ) showed excellent NO 2 sensitivity (Δ R / R 0 = 605% to 1 ppm NO 2 ) at the optimal operating power (∼184 μW). In addition, the sensor showed a low limit of detection (∼14.9 ppb) and robustness to high humidity conditions, which demonstrate its potential for practical applications in mobile internet of things (IoT) devices.
Cho et al. (Fri,) studied this question.