Answers are grounded in this paper and cite their sources.
Residual electrical resistivity has been used as an index of the damage present in tungsten irradiated in a nuclear reactor at 4°K and 77°K. A comparison was made between four different types of specimen prepared from cold-drawn wire respectively annealed before irradiation at 2000, 1500, 800°c and not at all. A fifth type of specimen was prepared from wire in a different state of purity. Four stages of recovery have been identified. the first occurring below −170°c, the second between −170 and 350°c with an activation energy rising from 0.25 to 1.7 ev, the third between 350 and 450°c with a single activation energy, of 1.7 ev and the fourth above 450°c. Second-stage recovery was enhanced by the presence of cold-work, affected by impurities and in well-annealed samples after light irradiations it was suppressed. A comparison of recovery with that in other metals leads to the conclusion that vacancies in tungsten migrate at 400°c with an activation energy of 1.7 ev. The general suggestion is advanced that vacancy migration occurs in all metals at a temperature approximately 20% of the absolute melting point T m °K, with an activation energy roughly 5 × 10−6 T m , ev. Recovery in tungsten above −170°c is attributed to the release of interstitials from traps associated with impurity atoms and dislocation lines. The free interstitial is assumed to become mobile below −170°c. The resistance versus dose curve for cold-worked tungsten shows acceleration and this is considered as evidence for the action of spikes on the unstable arrays of vacancies produced by deformation. A quantitative theory of damage and recovery developed from the above model predicts the observed behaviour of the five types of tungsten specimen.
No takes yet. Share an insight, caveat, or question.
M. W. Thompson (1960) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: