Answers are grounded in this paper and cite their sources.
This paper firstly introduces the CFD theory of particle erosion, compares various turbulence models, and determines that the RNG model is used to control the fluid motion; the DPM model is used to control the particle motion.When the particle mass flow rate is certain, the erosion effect of particles of different diameters on the bend is obtained, and the erosion rate of 90 bend is the largest, followed by that of 60 bend, and the erosion rate of 135 bend is the smallest.The same angle of the bend, the erosion rate with the increase in particle diameter shows a trend of first increase and then decrease.The position of the maximum erosion rate, that is, the most obvious erosion phenomenon of the region with the angle of the elbow decreases and gradually moved back.The erosion rate of the pipe increases with the increase of particle number, and the two curves approximate a function; the erosion rate of the pipe increases with the increase of hot water flow rate in the pipe.When the mass flow rate of particles is certain, the erosion phenomenon of pipeline is most serious for particles with 200m diameter, and the maximum erosion rate appears in the case of particle flow rate of 0.2kg/s and flow rate of 3.0m/s.
No takes yet. Share an insight, caveat, or question.
Yang et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: