Answers are grounded in this paper and cite their sources.
Standard epoxy resins have good mechanical properties, but their prolonged low temperature curing time limits their potential use in clinical applications as well as in many industrial applications. A fast‐curing epoxy‐episulfide resin has been developed. The gel time of epoxy‐episulfide made from EPON Trade mark of Shell Chemical Company. 828 ranges from 2 to 10 minutes by changing the ratio of the ingredients. The heat of reaction of this system is low, resulting in low cure shrinkage. Water absorption of the episulfide network is low. The epoxy‐episulfide system cured with polyamide curing agent V‐40 exhibits two transition temperatures, at about 85°C and 130°C, as shown in dynamic mechanical analysis data. In order to solve the long term stability problem of the above episulfides, and also the mixing problem, a lower viscosity resin, Eponex , was used to make Eponex‐sulfide. Eponex‐sulfide systems show promise in that they remain in a stable liquid form without epoxy. The other advantages appear to be retained.
No takes yet. Share an insight, caveat, or question.
Bell et al. (1996) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: