Answers are grounded in this paper and cite their sources.
In this research, we used a straightforward and cost-effective methodology to fabricate a three-dimensional nickel-molybdenum (NiMo) thin-layer coating, sparsely decorated with gold crystallites, on a titanium substrate (denoted as Au(NiMo)/Ti). The catalysts were prepared by depositing NiMo onto a Ti surface through a simple electrochemical deposition technique involving a dynamic hydrogen bubble template, followed by gold crystallite decoration via galvanic displacement. The prepared NiMo/Ti and Au(NiMo)/Ti catalysts were investigated as promising potential materials for alkaline fuel cells. The Au(NiMo)/Ti-3 catalyst with an Au:Ni:Mo molar ratio of 1:52.5:2.4 exhibited significantly higher electrocatalytic activity toward the oxidation of sodium borohydride and the reduction of oxygen compared to the NiMo/Ti with a Mo:Ni molar ratio of 1:7.8 to 1:24.3, and Au(NiMo)/Ti-2 and Au(NiMo)/Ti-1 catalysts with Au:Ni:Mo molar ratios of 1:50.1:5.5 and 1:51.2:7.5, respectively. Direct alkaline NaBH₄-H₂O₂ single fuel cell tests were conducted using the prepared NiMo/Ti-3 with Mo:Ni molar ratio of 1:24.3 and Au(NiMo)/Ti-3 catalysts as the anode materials. The investigation revealed that the peak power density of up to 162 mW cm⁻² was attained at 25°C with a current density of 202 mA cm⁻² and a cell voltage of 0.8 V, when Au(NiMo)/Ti-3 was employed as the anode catalyst. The highest Au mass-specific peak power density of 42.9 kW g⁻¹ was obtained at 55°C. The Au(NiMo)/Ti-3 catalyst demonstrated significantly higher activity and greater stability than the NiMo/Ti-3 catalyst. Overall, the NiMo/Ti and Au(NiMo)/Ti catalysts are promising materials for use as anodes in direct sodium borohydride fuel cells.
No takes yet. Share an insight, caveat, or question.
Barua et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: