Answers are grounded in this paper and cite their sources.
Composites of palm fiber and polypropylene were compounded using a mixing equipment connected to an extruder. The composites were then injection molded into standard tensile specimens for mechanical characterization. The fracture morphology of the specimens was also analyzed by Scanning electron microscopy. It was observed that as the fiber content increases the composite modulus also increases, which is an indication for the existence of adhesion to some degree between polypropylene and the much stiffer palm fiber. However, the adhesion is not satisfactory, resulting in decrease in composite tensile strength with fiber addition. The compatibilizer Epolene G-3003 was used to minimize this incompatibility between the wood fibers and the polypropylene matrix. Utilizing Epolene G-3003 improved the fiber-matrix adhesion, resulting in a significant improvement in composite performance. The composite strength with 40 wt% fiber content and 6 wt% compatibilizer almost reached the strength of pure polypropylene.
No takes yet. Share an insight, caveat, or question.
Kahraman et al. (2005) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: