Answers are grounded in this paper and cite their sources.
Nanotechnology is the science that studies matter at nanometric sizes, with far-reaching implications and applications in various fields such as medicine [1],materials physics, wastewater treatment, electronics, food, and agriculture [2, 3]. Due to current issues regarding global warming and the considerable growth of the current population, the use of different nanoparticles has emerged as a viable option to stimulate various stages of plant growth [4], without neglecting sustainable and efficient practices. Among these nanoparticles are carbon nanotubes (CNT) [5], which are graphene sheet-based nanoparticles. Research conducted by Swift et al. (2019) in Avena sativa demonstrated that multi-walled carbon nanotubes (MWCNT) stimulated germination and development, facilitating water absorption, and promoting the generation of secondary roots. Similarly, McGehee et al. (2017) showed that the use of MWCNT can have positive effects on both fresh and dry weight in Avena sativa. On the other hand, Xiuping Wang et al. (2012) in Triticum aestivum demonstrated an increase in root elongation, possibly due to the increase in dehydrogenases, which leads to an increase in total biomass. With the study of these nanomaterials, it was discovered that performing functionalization, which is the process of adding molecules to the structure of MWCNT [6], serves to modify their physicochemical properties and their respective effects on different biological models [7]. Adding specific molecules allows us to obtain the characteristics of these molecules in MWCNT [8]. Therefore, the focus of this study is to observe the effect of synthetic CNT on Avena sativa, as well as the differences that exist when performing oxidation and functionalization with fluorescein isothiocyanate (FITC). The functionalization process of the CNT, initially, the oxidation of CNT with a mixture of HNO3 and H2SO4 at a ratio of 2:3 (v/v) was conducted under continuous stirring for 24 hours. Subsequently, FITC and N,N-dimethylformamide (DMF) were introduced and left in darkness for 8 hours. Following this period, 150 mL of chloroform was added and stirred for an additional hour. The samples were then subjected to centrifugation at 2500 rpm for 3 minutes, with the resultant precipitate recovered and subjected to several washes with methanol. Finally, the samples were dried in an oven at 70 °C for 24 hours [5]. The samples were analyzed by Fourier transform infrared spectroscopy and scanning electron microscopy. were performed on the CNT to identify any structural changes and confirm the successful functionalization of fluorescein isothiocyanate in the CNT. To assess the impacts of pristine, oxidized, and functionalized CNT, the seeds underwent disinfection with 90% ethanol for 7 minutes, followed by five washes with distilled water. Subsequently, the seeds were primed with CNT at 2.5, 5, 10, and 20 µg/mL for 24 hours. Finally, oat seeds were sown in sterile agrolite, with five seeds per pot, and placed in a shade house. Nutrient solution was added weekly, and the germination time and percentage were monitored for 8 days. After 30 days of development, the seedlings were harvested to evaluate their biomass. The results obtained from SEM assist us in observing the changes due to the oxidation and chemical functionalization of the CNT, showing alterations in morphology such as shape, size, and nanoparticle agglomeration (Fig. 1a). The FTIR analysis indicates changes in the characteristic groups of the carbon nanotubes, with the addition of OH at 1165 cm-1 or C=O at 1600 cm-1 groups during oxidation, and the addition of characteristic groups of fluorescein isothiocyanate such as N=C=O in 2162 cm-1 groups through functionalization (Fig. 1b). This indicates that the functionalization process was carried out successfully, and the molecule is present within the nanoparticle structure. Seed Germination, and biomass. The results obtained from germination with pristine, oxidized, and functionalized CNT treatments at 2.5, 5, 10, and 20 µg/mL, as shown in Table 1, demonstrate positive outcomes in both germination speed and final germination percentage in most cases compared to the control. Most of the treatments exhibited significant differences compared to the control on day 4, with the treatments of pristine at 10 µg/mL and functionalized at 5 µg/mL achieving the highest percentage of germination that day. Regarding the final germination percentage, functionalized nanotubes at 2.5, 5, and 10 µg/mL yielded the best results. Additionally, fresh, and dry weight were evaluated 30 days after germination, showing positive results in fresh weight mainly in pristine and functionalized treatments (fig. 2a). While dry weight, significant differences were observed only with the oxidized CNT treatment supplemented with 10 µg/mL and functionalized CNTs at 2.5 and 20 µg/mL (fig. 2b). Scanning electron microscopy analysis of the different CNT (pristine, oxidized, and functionalized), revealed morphological changes through the oxidation and functionalization processes. These modifications may impact chemical reactivity, solubility, and consequently have different effects on plant systems, as demonstrated by E. Mohammadi et al. (2020). Additionally, Fourier transform infrared spectroscopy analysis provided information confirming the functionalization of these nanoparticles by observing changes in the characteristic groups of the CNT. Regarding the analysis of these nanoparticles in Avena sativa, it was demonstrated that there is an increase in both germination speed and final percentage, resembling the findings of Samadi et al. (2023). While the fresh and dry weight, significant changes were observed in most treatments. This could be attributed to nanoparticles aiding in water absorption, as reported by Sharma et al. (2023). Oxidation and functionalization alter the chemical structure of carbon nanotubes, graveling physicochemical differences that have biological effects on Avena sativa. This is evidenced by comparing the effects of pristine, oxidized, and functionalized CNT on the growth and development of the plant. It is observed that when functionalizing the nanotubes with fluorescein isothiocyanate, the positive effects are enhanced. a) SEM micrograph of synthetic carbon nanotubes pristine, oxidized, and functionalized with fluorescein isothiocyanate, at 10Kv X1000 and X2000. b) FTIR of synthetic nanotubes with and without functionalization with fluorescein isothiocyanate. - Germination of Avena sativa cultivated with 0, 2,5, 5, 10 and 20 μg/mL of pristine, oxidized and FITC-functionalized synthetic CNT. The results were analyzed with t student, n=5 and p≤ 0.05, in a column value with an asterisk represent significant differences. - Germination of Avena sativa cultivated with 0, 2,5, 5, 10 and 20 μg/mL of pristine, oxidized and FITC-functionalized synthetic CNT. The results were analyzed with t student, n=5 and p≤ 0.05, in a column value with an asterisk represent significant differences. - Fresh and dry weight of Avena sativa cultivated with pristine, oxidized, and non-functionalized synthetic nanotubes with fluorescein isothiocyanate (FITC) 30 days after sowing. The results were analyzed with ANOVA-tukey, n=5 and p≤ 0.05, the bar indicates σ. Different letters show significant difference.
No takes yet. Share an insight, caveat, or question.
Alemán-Méndez et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: