Answers are grounded in this paper and cite their sources.
The influence of pre-straining and microstructure on the dynamic properties of car body high strength steels has been investigated at room temperature. The mechanical properties of a dual phase steel DP600, a TRIP steel TRIP700 and an austenitic steel AISI 301LN2B (1.4318) have been determined performing high speed servohydraulic and split-Hopkinson bar tensile tests in the strain rate range from 0.005s -1 up to 950s -1 . The pre-straining modes and levels, respectively 10% uniaxial, 10% plane strain and 5% biaxial pre-straining, have been chosen in this investigation according to industrial use. 10% plane strain pre-straining brings the highest increase of yield and tensile strength values. 5% biaxial and 10% uniaxial pre-straining have similar effect on strength properties. The austenitic steel presents a pronounced minimum for tensile strength values at around 1/s. A combination of adiabatic heating and exothermic γ → α' transformation produces some significant softening effects in the austenitic steel grade.
No takes yet. Share an insight, caveat, or question.
Larour et al. (2006) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: