Answers are grounded in this paper and cite their sources.
Pseudo-ternary piezoelectric ceramics of PMN-PT [Pb(Mg 1/3 Nb 2/3 )O 3 -PbTiO 3 ] composition modified with PMS [Pb(Mn 1/3 Sb 2/3 )O 3 ] were produced by solid-state sintering method using different temperatures in a range of 1100-1250 °C. The effect of sintering temperature on the crystal phases, microstructure and electrical properties were systematically investigated. Microstructural and compositional analyses have been carried out using scanning electron microscope (SEM) and X-ray diffraction (XRD). Besides, electrical characterization was performed by using an LCR meter, impedance analyzer and a Berlincourt d33-piezometer. XRD and SEM results indicated that the sintering temperature was effective on the formation of a homogeneous microstructure and a pure perovskite structure. Densification during sintering could not be completed and pure perovskite structure was not obtained at 1150 °C and lower sintering temperatures. Furthermore, sintering at temperatures higher than 1200 °C resulted in heterogeneous microstructure. The high dielectric and piezoelectric response of PMN-PT-PMS ceramics is considered to be related to their high densities and homogeneous microstructure obtained via proper sintering condition. The results showed that the ceramic samples sintered at 1175 °C for 2 h possessed the optimum properties (d 33 =265 pC/N, K T =4745, k p =0.417, tanδ=2.5%, Q m =222).
No takes yet. Share an insight, caveat, or question.
Düzen et al. (2017) studied this question.
Synapse has enriched 5 related papers. Consider them for comparative context: