Key points are not available for this paper at this time.
This study evaluated the efficiency of methylene blue (MB) removal by using activated carbon produced from olive pits. The activated carbon (OPAC) was characterized by scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), and Brunauer–Emmett–Teller (BET). The adsorption process was optimized in two stages using factorial design. Based on the existing literature, the first stage selected the most influential variables (reaction time, dosage, pH, and dye concentration). Response surface methodology (RSM) and artificial neural network (ANN) approaches have been combined to optimize and model the adsorption of MB. To assess the optimal conditions for MB adsorption, RSM was initially applied using four controllable operating parameters. Throughout the optimization process, various independent variables were employed, including initial dye concentrations ranging from 25 to 125 mg/L, adsorbent dosages ranging from 0.1 to 0.9 g/L, pH values spanning from 1 to 9, and contact times ranging from 15 to 75 min. Moreover, the R2 value (R2 = 0.9804) indicates that regression can effectively forecast the response of the adsorption process within the examined range. Thermodynamic studies were performed for three different temperatures between 293 and 303 K. Isothermal analysis parameters and negative Gibbs free energy indicate that the process is spontaneous and favorable. The data best fit the Langmuir model. This research showcases the effectiveness of optimizing and predicting the color removal process through the combined RSM-ANN approach. It highlights the effectiveness of adsorption using OPAC as a viable primary treatment method for the removal of color from wastewater-containing dyes.
Özçelik et al. (Mon,) studied this question.