This is the authors' abstract. We don't add key points for this paper.
A new configuration of circularly polarized annular-ring microstrip antenna (ARMSA) fed by a branch-line hybrid coupler placed at the inner part of the ARMSA and its design method using an equivalent circuit are presented. Since the ARMSA has a narrow bandwidth and high-input impedance, a parasitic element placed above the ARMSA is employed for not only obtaining a broadband characteristic, but decreasing the input impedance down to 50 /spl Omega/. A hybrid coupler to generate circular polarization, therefore, can be connected to the co-planar space of the ARMSA directly without a large-size matching circuit and a very low profile and simple structure can be achieved. The ARMSA is excited at the TM/sub 21/ mode to produce a conical pattern, which has a high gain in a low-elevation angle for mobile satellite communications. An effective design method using the equivalent circuit is indicated and, as a result, it is obvious that a broadband characteristic is obtained when each resonant frequency of the ARMSA and parasitic element is identical. Experimental results in the L-band showed satisfactory characteristics for vehicle antennas.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Ohmine et al. (1997) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: