Answers are grounded in this paper and cite their sources.
Tensile and flexural properties of aluminum/self-reinforced polypropylene fiber metal laminates (Al/SRPP FMLs) based on 2/1 and 3/2 configurations are investigated in this paper. The Al/SRPP FMLs based on 2/1 configuration exhibit better performance than the Al/SRPP FMLs based on 3/2 configuration in terms of tensile and flexural properties. The metal volume fraction plays an important role in the tensile strength and flexural strength in both Al/SRPP-2/1 FMLs and Al/SRPP-3/2 FMLs. The tensile stress–strain curves of Al/SRPP-2/1FMLs and Al/SRPP-3/2FMLs decline while the ductility of both FMLs enhances as the temperature increases. The elevated temperature intensifies the delamination of the Al/SRPP FMLs, especially for Al/SRPP-3/2FMLs because of possible more manufacture defects. The outer metal cracking and inter-laminar delamination are the main tensile failure mechanisms. However, delamination at the metal/composite interface and breakage of the constituent materials does not occur after the flexural tests.
No takes yet. Share an insight, caveat, or question.
Pan et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: