This is the authors' abstract. We don't add key points for this paper.
Microwave-assisted pyrolysis was applied using four magnetrons to implement a high intensity at a power density of 0.3107 W/m3 with 800 g specimen size. The 23 full factorial experimental design manipulated the factors temperature, mixture ratio, and pyrolysis time, seeking to maximize %yield at minimum cost of crude bio-oil. The optimum according to model fit had a temperature of 611 °C with a 70:30 sample mixture ratio of oil palm shell (OPS) to activated carbon (AC), and time 39.6 min for a yield of 15.3% and 8.48 Thai-Baht/cc cost. The coefficients of determination were R2 = 93.99% and 94.00% for the respective models. In the aqueous phase of crude bio-oil, acetic acid was the dominant chemical component at 55.2%, whereas phenol was dominant in the bio-oil phase at 44.2%, from 400 °C pyrolysis temperature. The assessed properties of bio-char were proximate composition, heating value, specific surface, and pore volume, and these were improved compared to the raw OPS. However, these properties must be improved further to match commercial-grade activated carbon.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Jansuwan et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: