Answers are grounded in this paper and cite their sources.
Traditional phenolic resins face challenges, such as high curing temperatures and brittleness, severely limiting their widespread application. This study proposes a partially bio-based strategy, in which hydroxylated graphene (G-OH) is employed for the first time as a green nucleophile to depolymerize Acacia mangium tannin, thereby completely avoiding the use of petroleum-derived and/or toxic nucleophiles. The resulting depolymerized tannin is used to replace 50% of phenol in the synthesis of phenolic resins. This innovative approach resulted in a substantial reduction in the average polymerization degree of the depolymerized tannin (GOH-DAMT), decreasing from 9 to 2. The low molecular weight and high reactivity of GOH-DAMT considerably accelerate the curing speed of GOH-DTPF, reducing the initial curing temperature from 157.9 °C to 136.9 °C. The increased reactivity of GOH-DAMT enhances the resin’s cross-linking density, while the uniformly dispersed nanosheets effectively facilitate the transfer of interfacial stress. The bonding strength of GOH-DTPF cured at 115 °C met the Class I plywood production requirements (GB/T 9846 − 2015, ≥ 0.7 MPa), while the bonding strength of GOH-DTPF cured at 120 °C and 130 °C increased from 0.78 MPa and 0.95 MPa for TPF to 1.15 MPa and 1.30 MPa respectively, surpassing those of PF (0.97 MPa and 1.12 MPa). Furthermore, GOH-DTPF exhibited a 155% increase in the work of adhesion compared to PF, demonstrating high toughness. These advancements highlight the potential of GOH-DTPF resins for a broader range of applications in wood-based composites and their promise for sustainable industrial use.
No takes yet. Share an insight, caveat, or question.
Wang et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: