This is the authors' abstract. We don't add key points for this paper.
A series of cathodic polarization experiments for DH36 steel has been performed with seawater flow in a range of flow velocities: 0.20, 0.40, 0.60, 0.80, 1.00, 1.20, 1.40 and 2.00 m/s in a pipe flow circulating seawater device. For each flow velocity, at least three different polarization current densities were chosen to perform galvanostatic cathodic polarization for 7 d. The results showed that the current density demand for an adequate cathodic protection (CP) increased with the flow velocity; the potential could be also polarized to achieve -800 mV vs the silver/silver chlo- ride (seawater) reference electrode (Ag/AgCl (sw)) when the velocity was up to 1.00 m/s; however when the velocity was above 1.20 m/s, erosion-corrosion probably could occur even the polariza- tion potential has achieved the protective potential; the calcareous deposits formed on the steel sur- face were most single magnesium-rich layers. Exceptionally, calcium-rich deposits could form on top of the magnesium-rich layer only when a very high current density was applied.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Fengqin et al. (2015) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: