Answers are grounded in this paper and cite their sources.
Bridge stability is often compromised due to scouring around abutments, which are particularly vulnerable to failure from vigorous scour. This experimental study investigates the effectiveness of single collar plates of widths 0.25 La, 0.5 La, 0.75 La, La and multiple collar plates of widths 0.25 La, 0.5 La around vertical wall with semicircular end abutment over a duration of 24 hours. A collar plate with width equal to the length of the abutment (Wc = La), when positioned at the average bed level, resulted in an 88.30% performance potential. Additionally, multiple collar plates of width 0.25 La and 0.5 La were employed to protect the abutment from scouring effects. A configuration of five collar plates (two positioned below, one at bed level, and two above the bed level), each with width of 0.5 La and inter-plate spacing (Cs) of La/4, demonstrated an enhanced performance potential of 84.53%. The use of multiple collar plates provides additional safety for the bridge abutment during degradation of the bed level.
No takes yet. Share an insight, caveat, or question.
Meena et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: