Multi-Condition Optimization of Cavitation Performance on a Double-Suction Centrifugal Pump Based on ANN and NSGA-II

Double-suction centrifugal pumps form an integral part of power plant systems in maintaining operational stability. However, there has been a common problem of achieving a better cavitation performance over a wider operating range because the traditional approach for impeller design often leads to the design effect not meeting the operational needs at off-design conditions. In addressing the problem, an optimization scheme was designed with the hub and shroud inlet angles of the double-suction impeller to minimize the suction performance at non-design flow conditions. A practical approach that speeds up the cavitation simulation process was applied to solve the experimental design, and a multi-layer feed forward artificial neural network (ANN) was combined with the non-dominated sorting genetic algorithm II to solve the multi-objective problem into three-dimensional (3D) Pareto optimal solutions that meet the optimization objective. At the design point, the suction performance was improved by 6.9%. At non-design flow conditions, the cavitation performance was improved by 3.5% at 1.2Qd overload condition, 4% at 0.8Qd, and 5% at 0.6Qd. Additionally, there was significant reduction in the attached cavity distribution in the impeller and suction domains when the optimized model was compared to the original model at off-design points. Finally, the optimization established a faster method for a three-objective optimization of cavitation performance using ANN and 3D Pareto solutions.