Answers are grounded in this paper and cite their sources.
This study presents a dual-output approach involving the continuous depolymerization of lignin in supercritical water (SCW) under various reaction conditions (pure water, alkaline, acidic, oxidative, and solvent-assisted). SCW treatment produced acetone-soluble oil yields ranging from 15.8 wt% under alkaline conditions to 81.5 wt% under oxidative H₂O₂ conditions. The resulting products exhibited weight-average molecular weights of 1200 Da to 2300 Da and hydroxyl functionalities of up to 14.9 mmol OH g⁻¹ . A functionalized lignin-derived solid fraction obtained in SCW at 380 °C and 26 MPa (designated as reference C2) was chosen as a potential renewable additive for bio-based thermoplastic polyurethanes (BioTPUs), which were synthesized via a two-step, solvent-free polycondensation process. Varying the lignin content (0 wt% to 1 wt%) and the stage of its incorporation (prepolymer vs. chain extension) revealed that adding it early enhances molecular weight and structural stability, likely due to more homogeneous dispersion during network formation. Compression-molded BioTPU films (with a thickness of ∼300 µm) displayed continuous morphology and surface adhesiveness. The formulation containing 1 wt% of lignin added during the prepolymer stage achieved an oxygen permeability of (4.98 ± 0.46) x 10 −13 mol·m −1 ·s −1 ·Pa −1 (43 ± 0.4 cm 3 ·cm·m - ²·day −1 ·atm −1 ), indicating potential suitability for breathable materials, such as those used in wound-dressing applications. This study provides an integrated demonstration of continuous supercritical water (SCW) lignin depolymerization and subsequent polymer-grade utilization, enabling the simultaneous production of bio-oils and functional, lignin-reinforced thermoplastic polyurethane (TPU) materials within a single valorization framework, thereby highlighting a scalable strategy for the high-value utilization of lignin across both chemical and material domains.
No takes yet. Share an insight, caveat, or question.
Menalla et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: