Answers are grounded in this paper and cite their sources.
Rack railways are often used on steep-slope lines because longitudinal forces can be transmitted through gear–rack meshing. Under braking, the combined effects of braking forces, gear–rack meshing forces, and wheel–rail contact forces can produce strong longitudinal dynamics, which may threaten the safety of the vehicle–track system. In this work, a dynamic model of a rack vehicle–track system under braking is established, and the dynamic characteristics of the vehicle and track structure at different braking speeds on steep-slope lines are investigated. Longitudinal and vertical acceleration responses of key components, including the car body, gears, and wheelsets, are analyzed during braking. The results show that when the braking speed increases from 10 km/h to 50 km/h, the peak longitudinal acceleration of the car body increases from 0.273 m/s² to 0.995 m/s², while the increase in vertical acceleration is limited. This indicates that the braking-induced response is mainly longitudinal. Gear responses are much stronger: the peak longitudinal acceleration increases from 57 m/s² to 127 m/s², which shows that gear–rack meshing plays a major role in amplifying longitudinal vibration. The evolution of gear–rack meshing forces and wheel–rail contact forces during braking is also examined. The peak longitudinal gear–rack meshing force increases from 321 kN to 596 kN, and the longitudinal wheel–rail contact force increases from 20 kN to 49 kN. At the structural level, the longitudinal stress of the rack increases sharply under high-speed braking and reaches 179.1 MPa, which is much higher than that of the rail. In addition, excessive longitudinal slip of the rail occurs in the braking zone and exceeds the allowable elastic displacement of small-damping fasteners (2 mm), which indicates a risk of fastener failure. These results show the distinctive longitudinal dynamic behavior of rack railways under braking compared with conventional adhesion railways. The findings can support safety assessment, speed control, and track structure design for rack railways under braking.
No takes yet. Share an insight, caveat, or question.
Chen et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: