Answers are grounded in this paper and cite their sources.
This study evaluated biodegradation properties of four novel high-toughness double network (DN) hydrogels as potential materials for artificial cartilage. Concerning each DN gel material, a total of 12 specimens were prepared, and 6 of the 12 specimens were examined to determine the mechanical properties without any treatments. The remaining 6 specimens were implanted into the subcutaneous tissue, using 6 mature female rabbits. At 6 weeks after implantation, the mechanical properties and the water content of the implanted specimens were measured. In the poly(2-acrylamide-2-methyl-propane sulfonic acid)/poly(N,N'-dimethyl acrylamide) DN gel, the ultimate stress and the tangent modulus were significantly increased from 3.10 and 0.20 MPa, respectively, to 5.40 and 0.37 MPa, respectively, with a significant reduction of the water content after implantation (94 to 91%). In the poly(2-acrylamide-2-methyl-propane sulfonic acid)/polyacrylamide DN gel and the cellulose/poly(dimethyl acrylamide) DN gel, the stress (11.4 and 1.90 MPa, respectively) and the modulus (0.30 and 1.70 MPa, respectively) or the water content rarely changed after implantation (90 and 85%, respectively). In the bacterial cellulose/gelatin DN gel, the ultimate stress was dramatically reduced from 4.30 to 1.98 MPa with a significant increase of the water content after implantation (78 to 86%). This study implied that these DN gels except for the cellulose/gelatin DN gel are potential materials that may meet the requirements of artificial cartilage.
No takes yet. Share an insight, caveat, or question.
Azuma et al. (2006) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: