This is the authors' abstract. We don't add key points for this paper.
In this article, one of the very first 800-V fuel cell DC–DC converter (FDC) is developed for the next-generation fuel cell electric vehicles. The higher boost gain ratio and switching loss associated with increasing dc-link voltage, along with gradually increasing power density and efficiency demanded in the next-generation EV power converters, make the conventional boost converter not suitable for 800-V FDC. This article proposes a new design approach in which a zero voltage transition (ZVT) high step-up dual floating output boost converter (DFOBC) is introduced. Due to higher voltage gain, the operating duty cycle of DFOBC is reduced and lies in the vicinity ofD= 0.5, which reduces filter size. The ZVT cells greatly reduce switching losses at 300 kHz, which enables using only a single discrete SiCmosfetfor the main switch of 25-kW module, contributing to volume and cost reduction. Moreover, the proposed converter successfully demonstrates the possibility of using planar core and printed circuit board (PCB) windings at 100-kW power level, which is rarely seen in previous works. Finally, a 25-kW prototype of the proposed ZVT DFOBC is built and test. The power density of 63 kW/L excluding heatsink is achieved. The peak and full-load efficiency are measured to be 99.0% and 97.7%, respectively.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Tran et al. (2021) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: