This is the authors' abstract. We don't add key points for this paper.
The standard approach to signal difference-to-noise ratio (SDNR) analysis requires a region of interest (ROI) positioned within the object to measure signal-difference, restricting this metric to flat-topped objects with large, sharply delineated areas. This work develops a generalized expression for SDNR (SDNR g ) calculated from a ROI encompassing the object. Signal power, defined as the deviation of pixel values from the mean background due to the object, is used instead of signal-difference. Comparison was first made by simulating ideal flat-topped discs with sharp edges and diameters between 1 and 80 pixels, into a uniformly noisy background using a known signal-difference. For discs covering more than 20 pixels, SDNR g and standard SDNR (SDNR st ) were within 3%, while for discs of less than 20 pixels, SDNR g was within 26% of the truth compared to 58% for SDNR st . Generalized and standard SDNR were compared for radiography images of three different phantoms with microcalcification-like objects (MTM-100 phantom), hemispheric objects of different thicknesses with a Gaussian intensity distribution and mammography quality control (QC) images. Applied to Gaussian details, SDNR g was between 20% and 45% higher than SDNR st , depending on object thickness, while for the QC images, SDNR g was with 1.7% of the standard SDNR. Compared to the standard SDNR, SDNR g is applicable to non-uniform signals, where an explicit contrast measurement is not suitable, and has improved accuracy when assessing SDNR of small objects.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Monnin et al. (2019) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: