This is the authors' abstract. We don't add key points for this paper.
A compact parallel-coupled-line microstrip bandpass filter with a very wideband passband and a narrow notched band is demonstrated in this paper. The presented bandpass filter was constructed from one section of three parallel-coupled-lines which has a length of a quarter wavelength at a midband frequency of 6.9 GHz. For the purpose of increasing the filter selectivity, the middle line is extended by a length of a quarter-wavelength and connected at one end to the ground plane. Therefore, a transmission zero was generated at each side of the passband which effectively improved the filter performance. In addition, a narrow notched band at a precise frequency inside the proposed passband was exhibited by placing a stepped-impedance resonator near the parallel-coupled-line for blocking the unwanted radio signal. The proposed filter was designed, simulated, fabricated, and measured. The fabricated filter has a very compact circuit size and its measured response shows an excellent agreement with the simulated results.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Almansour et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: