Answers are grounded in this paper and cite their sources.
In a quick assessment carried out around dumpsites of a battery manufacturing plant, heavy metals content of sediment, surface water and ground water samples from seven ponds, three streams and a well were assessed using Atomic Absorption Spectrophotometer (AAS). Some physicochemical parameters of the samples were also investigated. Metal concentration in pond and stream sediment samples ranged from 25.71-75,843 μg/gPb, 0.74-4.13 μg/gCd, 32.35-385.31 μg/gCu, 3.17-28.5 μg/gNi, 558.25-908.42 μg/gFe and 10.01-53.59 μg/gZn and these metal concentrations exceeded allowable guidelines for sediment by USEPA. For water samples in general, concentration of metals ranged as Pb(0.001-5.69 mg/L), Cd(0.0006-0.0699 mg/L), Cu(0.001-0.09 mg/L), Ni(0.001-0.38 mg/L), Fe(0.0399-17.099 mg/L) and Zn(0.001-0.14891 mg/L). Physicochemical parameters in water were pH (4.54-7.59), Temperature (25-28 OC), DO (2.49-6.45 mg/L), TS (296-35,100 mg/L), TSS (2.0-281 mg/L), TDS (290-34,800 mg/L), Cl- (12.2-52.5 mg/L), NO3- (3.2-800 mg/L), PO43- (0.14-1.58 mg/L) and SO42- (76.0-5,300 mg/L). Results obtained for TSS, TDS, NO3-, SO42-, Pb, Cd and Fe in water, especially in ponds at Ile-Igbon and Ni in Aweere Stream, exceeded limits set by standard organisations as well as results from similar work.
No takes yet. Share an insight, caveat, or question.
Osibanjo et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: