3 nm-sized porous graphene-based anion exchange membranes for efficient and stable water electrolysis

This is the authors' abstract. We don't add key points for this paper.

Alkaline water electrolysis is one of the primary drivers of hydrogen energy development, and anion exchange membranes (AEMs) play a dual role in ensuring both conductivity and safety. However, traditional polymer AEMs have a wide pore size distribution and poor chemical stability, making it difficult to achieve a long-term balance between conductivity and safety of the water electrolysis system. Here, we select inorganic two-dimensional multilayer graphene oxide (GO) membranes as AEMs, using carboxylated wrinkled graphene (WG) and ethylenediamine (EDA) to create a cation-modified porous EDA-WG/GO (E-W/G) composite membrane with a 3 nm pore size. The enlarged channel size and enhanced hydrophilicity improve OH − permeability compared to the pristine GO membrane, while the strengthened hydration layer acts as a barrier to hydrophobic gases for O 2 /H 2 separation. The results show that the prepared E-W/G membrane exhibits superior current density (600 mA cm −2 ) and gas impermeability (gas purity 99.99%) compared to the commercial Fumasep FAA-3-50 membrane (590 mA cm −2 and 99.81%, respectively). Furthermore, after continuous testing for 168 h in high-temperature and alkaline environments, the E-W/G membrane maintained conductivity comparable to its initial state and showed enhanced gas impermeability. Our strategy provides new insights into the design of high-performance AEMs and is expected to contribute to the advancement of the hydrogen energy industry. 3 nm-sized porous EDA-WG/GO AEMs for highly effective and stable water electrolysis. • Developed a strategy for constructing 3 nm-sized porous graphene membranes • The 3 nm structures enhanced the OH − permeability • The improved membrane hydrophily effective isolation of gas penetration • GO-based AEMs could present a stable conduction and gas isolation properties