Answers are grounded in this paper and cite their sources.
A high rate and high performance Li3V2(PO4)3 cathode was prepared by applying a carbon coating and Al substitution using the conventional solid-state approach. X-Ray diffraction was used to observe the structural properties of the synthesized powders. The presence of the carbon coating was confirmed by HR-TEM and reflected well with the Raman analysis. The Li/C-Li3V1.98Al0.02(PO4)3 cell displayed a discharge capacity of 182 mA h g−1 between 3 and 4.8 V vs. Li at a current density of 0.1 mA cm−1, which is ∼20 mA h g−1 higher than that of the native compound. The capacity retention was found to be 84 and 74% after 40 and 100 cycles, respectively. The C-Li3V1.98Al0.02(PO4)3 powders demonstrated excellent rate performance at 20 C with a discharge capacity of ∼120 mA h g−1 over 100 cycles. The elevated temperature performance was also evaluated and found to be similar to that under room temperature conditions.
No takes yet. Share an insight, caveat, or question.
Cho et al. (2012) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: