Answers are grounded in this paper and cite their sources.
A new MnZn ferrite with low core loss, P cv and high saturation flux density, B s above 100C have been developed as a material suitable for transformer or inductor cores, which operate in the high temperature range from 130 to 150C. The material with the B s of 400mT at 140 C and the P cv of 286kW/m 3 at 140C, 100 kHz and 200mT have been obtained, and it is most suitable for onboard power supplies etc. The magnetic properties of the core were realized by choosing the desired compositions and optimizing the sintering conditions. In order to decrease the P cv and to increase the B s , it is necessary to select a composition in which magnetic anisotropy and magnetostriction are zero in the ternary system of MnO-ZnO-Fe 2 O 3 and to add NiO to the main composition. Furthermore, by controlling the temperature and the atmosphere precisely in sintering, the adequate uniform grains and the grain boundaries, in which trace additives are precipitated, are realized in the core which is as free as possible from defects, pores, impurities, etc. within grains at the same time, and thereby the low loss and the high saturation flux density were improved in the high temperature range above 100C.
No takes yet. Share an insight, caveat, or question.
Gotoh et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: