Answers are grounded in this paper and cite their sources.
To develop a unified method for evaluating the fatigue strength of adhesive joints, shear tests were conducted under static and fatigue loading conditions on dissimilar single-lap bonded joints composed of A5083P-O and CFRP bonded with a second-generation acrylic adhesive. The cumulative energy dissipated in the adhesive layer, W d,f , was calculated, and a fracture criterion incorporating loading frequency and mean stress was proposed. Using the fracture stress of 17.9 MPa obtained from shear tests as a reference, fatigue tests were performed under stress ratios of 0.5, 0, and −1, and loading frequencies of 2 Hz and 10 Hz. The resulting τ a − N f fatigue curves showed that the predicted number of cycles to failure N f,pred and experimental values N f,exp scattered to a Factor of 20 range. An experimental method was established to estimate adhesive strain rate from the relative displacement between adherents across the adhesive layer, enabling calculation of W d,f . A fracture criterion was derived by fitting the relationship between W d,f and cumulative cycles to failure N f,c on a double-logarismic diagram. The main novelty of this study lies in the simplified experimental procedure for estimating adhesive-layer shear strain rate from adherent displacements, which enables practical application of the energy-based criterion. The predicted N f,c values showed a Factor of 3 agreement with N f,exp , indicating a sixfold improvement in fatigue life prediction accuracy compared to conventional fatigue curves.
No takes yet. Share an insight, caveat, or question.
SAWADA et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: