Answers are grounded in this paper and cite their sources.
Thermal profiles of a single-element quantum cascade laser (QCL) and a five-element QCL array at different bias currents, under quasi-continuous-wave (QCW) conditions, are obtained using the charge-coupled device (CCD)-based thermoreflectance imaging technique. Peak temperature changes of 55 K and 105 K are measured on the single-element QCL (operating at 1.2 A) and the central element of the QCL array (operating at 4.2 A), respectively. The average facet temperature of the single QCL device shows a linear relationship with the dissipated power, indicating an effective thermal resistance of Rth = 3.0 ± 0.2 K/W (7%) for the device. The thermal transient behavior of the single QCL device, in response to a 35 μs-wide heating pulse, is also measured. From the transient curve, an effective thermal time constant of τth = 9.5 ± 0.4 μs (4%) is obtained. Experimental results are compared to the results obtained from heat-transfer models for both the single-element and array devices. Thermal profiles show a thermal lensing effect at the facet of the single-element QCL. In the array device, a more pronounced heating is observed at the center of the device while the temperature gradually decreases away from the central element.
No takes yet. Share an insight, caveat, or question.
Becher et al. (2019) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: