Answers are grounded in this paper and cite their sources.
Demonstrates reduced energy use and installed power with a hybrid pump-valve drive in multi-actuator systems, indicating enhanced efficiency for heavy electric machinery.
Load-sensing systems use a centralized power source for energy supply and multiway valves for flow distribution and suffer from excessive throttling losses and low energy efficiency. Pump-controlled systems adopt volumetric control methods to eliminate throttling losses. However, pump-controlled multi-actuator systems require excessive installed power. To address these issues, by combining the respective advantages of valve- and pump-controlled technologies, an open–closed circuit integrated pump-valve collaborative drive multi-actuator system consisting of pump- and valve-controlled units is proposed. The pump-controlled units manage the individual actuator motions, whereas the valve-controlled unit enhances the driving power of the pump-controlled units. In addition, to optimize the operation characteristics and energy consumption, a four-quadrant control strategy and an ultralow-pressure loss control strategy were proposed. Several experiments were conducted to evaluate the working performance of the proposed system and the load-sensing system under different working conditions. Experimental results demonstrated that the proposed system exhibited satisfactory velocity control characteristics. Compared with the traditional load-sensing system, the proposed system reduced throttling losses by 90.4−94.4% and energy consumption by 45.9−50.0%. Additionally, only 22.8% of the total energy consumption was attributed to the pump-controlled units, with the remainder provided by the valve-controlled unit. Compared with the traditional pump-controlled multi-actuator system, the proposed system achieved a 29.4% reduction in installed power, thereby lowering the system installed power and costs. This paper presents an electrohydraulic multi-actuator drive method that combines high energy efficiency and high power density and is suitable for electric construction machinery and other heavy equipment with multiple actuators.
No takes yet. Share an insight, caveat, or question.
Liang et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: