Answers are grounded in this paper and cite their sources.
Measurements of plantar pressure provide an indication of foot and ankle functions during gait and other functional activities, because the foot and ankle provide both the necessary support and flexibility for weight bearing and weight shifting while performing these activities.1–3 Although plantar pressure data have been recognized as an important element in the assessment of clients with diabetes and peripheral neuropathy, information derived from plantar pressure data also can assist in determining and managing the impairments associated with various musculoskeletal, integumentary, and neurological disorders. The use of force platforms is the method most commonly used to assess the interaction of the foot and supporting surface. Although the force platform provides valuable information regarding both the vertical and shear components of the ground reaction force, it provides little information on how the planter surface of the foot is loaded with respect to the supporting surface. When evaluating patients, atypical amounts of loading or patterns of loading may be reflective of a systemic or localized lower-extremity pathology and may be indicators (risk factors) for or predictors of further pathology or worsening of the existing pathology.4 In addition, force platforms have very specific requirements for attachment to the supporting surface on which data collection will occur. Such is not the case with numerous commercially available systems for measuring plantar pressure (eg, Emed sensor platform, * Pedar insole system, * F-Scan system,† Musgrave footprint system‡). Thus, plantar pressure measurement systems offer the clinician a high degree of portability, permitting utilization among multiple clinic sites. Pressure (p) (also called “stress”) is defined as force (f) per unit area (a) (ie, p=f/a).5Force, when measured using a force platform, is the net result of the 3 components of the ground reaction or resultant force acting on the foot.6 The 3 components of the ground reaction force are in the fore-aft, medial-lateral, and vertical directions. When assessing plantar pressure, a discrete sensor or a matrix of multiple sensors is used to measure the force acting on each sensor while the foot is in contact with the supporting surface. The magnitude of pressure is then determined by dividing the measured force by the known area of the sensor or sensors evoked while the foot was in contact with the supporting surface.7 The System International (SI) unit of force is the newton, and the SI unit of pressure is the pascal. A pascal is defined as the pressure experienced when a force of 1 N is distributed over an area of 1 m2.8 Pressure values can be reported in newtons per square centimeter, pounds per square inch, or kilograms per square inch, but kilopascals or megapascals are the preferred units of measurement. Data obtained from a plantar pressure assessment can be used for the evaluation and management of patients with a wide variety of foot impairments associated with neurological and musculoskeletal disorders, which can affect both adult and pediatric patients.9–12 The assessment of plantar pressures can be included as part of a full laboratory gait analysis, or it can be done independently in either a laboratory or a clinical setting to help direct treatment options and for patient education. When plantar pressure values are determined to be atypical, the information can be used to modify a patient's management program through alterations in footwear, foot orthoses, exercise programs, and restrictions in the amount of weight bearing. Information obtained from pressure systems is also useful from a research perspective to address many questions regarding the relationship between plantar pressure and lower-extremity posture. Because standing and walking are not the only activities in which plantar pressures are generated, investigators have compared various aerobic,13 dance,14 and functional activities15 with level walking to provide insight into the stresses that these activities impart to the foot and lower extremity. This update on plantar pressure assessment has 3 purposes: (1) to provide the reader with an understanding of current technology and terminology used when measuring plantar pressures, (2) to explain the use of plantar pressure technology in the clinical setting, and (3) to review articles that illustrate how physical therapists have utilized plantar pressure measurements in the assessment and management of impairments associated with disorders of the neurological, integumentary, and musculoskeletal systems. For an extensive review of the development of plantar pressure assessment, the reader is referred to the articles by Alexander et al16 and Cavanagh et al.17 The typical components of a system used to measure plantar pressures include the measuring device, which consists of sensors in a platform or insole configuration; a computer for data acquisition, storage, and retrieval for analysis; and a monitor for displaying data. Various software packages are available that allow the clinician to divide the plantar surface of the foot into numerous regions to permit the analysis of data, as is illustrated in Figure 1. The most common variables of interest include peak and average pressure, force, and area. Peak pressure plots represent the highest pressure value recorded by each sensor over the entire stance phase.7Figure 2 depicts a peak pressure matrix obtained during walking for a child with juvenile rheumatoid arthritis (left) and a child of similar age without known pathology (right). The software provides values for pressure and a user-specified color scheme to graphically display the pressures acting on the plantar surface of the foot. In Figure 2, the colors red and purple denote the highest pressures, and the green, blue, and black colors represent the lower pressure values. Peak pressures are often of interest in determining the effectiveness of a cushioned foot orthosis in decreasing pressures under a sensitive metatarsal head, whereas average pressure values provide the clinician with an understanding of typical pressure acting on a specific anatomical region during the walking cycle. A peak pressure plot divided into 3 regions of interest: hindfoot, midfoot, and forefoot. A peak pressure plot divided into 3 regions of interest: hindfoot, midfoot, and forefoot. Peak pressure plots for 2 children of similar ages. Left plot is from a child with juvenile rheumatoid arthritis, and right plot is from a child without known pathology. Peak pressure plots for 2 children of similar ages. Left plot is from a child with juvenile rheumatoid arthritis, and right plot is from a child without known pathology. Area refers to the amount of surface contact between the plantar surface of the foot and the sensor. In the peak pressure plot shown in Figure 2, there is a marked variation in the area of contact with the ground between the 2 children. The area beneath the force-time curve as well as the pressure-time curve can also be determined and is referred to as the integral of the curve or impulse (Fig. 3). The impulse can be of use to the clinician in understanding the amount of force or pressure that has been applied over time, in this case the duration of foot contact.18 Commercially available software also permits the sequential viewing of both pressure and area, beginning at initial contact and ending when the foot leaves the ground, as illustrated in Figure 4. Three-dimensional displays of plantar pressure data can be effective when educating the patient regarding regions of high pressure on the plantar surface of the foot.7Figure 5 illustrates 3-dimensional pressure plots for a child with juvenile rheumatoid arthritis (left plot) and for a child of a similar age without known lower-extremity pathology (right plot). The 3-dimensional plots provide a graphic illustration of the extreme pressures acting under the fourth metatarsal head region of the child with juvenile rheumatoid arthritis in comparison with the other child. Such illustrations can also be effective in the patient education of individuals with diabetes and peripheral neuropathy to assist in their understanding of potential sites of ulceration. An illustration of the integral or the area under the pressure-time curve. An illustration of the integral or the area under the pressure-time curve. Sequence of pressure plots over the entire stance phase of walking. Sequence of pressure plots over the entire stance phase of walking. Three-dimensional peak pressure plots for 2 children of similar ages. Left plot is from a child with juvenile rheumatoid arthritis, and right plot is from a child without known lower-extremity pathology. Three-dimensional peak pressure plots for 2 children of similar ages. Left plot is from a child with juvenile rheumatoid arthritis, and right plot is from a child without known lower-extremity pathology. A limitation when using most pressure assessment systems is that the force value measured by the sensor and used in the calculation of pressure is normal force or a force that is perpendicular to the sensor surface. Normal force can be considered vertical force when a platform, fixed to the supporting surface, is used for data collection. When a sensor insole is placed in a shoe, however, normal force may only be considered vertical force during that portion of the stance phase when the entire foot is in contact with the supporting surface.17 In general, the sensors used for pressure measurement do not measure the fore-aft or medial-lateral shear forces that are obtained using force platforms.16 This is an important point, because shear forces are considered to be an important factor in the development of plantar ulcers in clients with diabetic neuropathies.7 Cornwall and McPoil19 were able to predict fore-aft or anterior-posterior shear force with a pressure sensor platform using a combination of peak force, time to peak pressure, and stance phase duration. To accomplish this, the authors attached a pressure sensor platform to a force platform and collected data with both systems recording simultaneously at a similar sampling frequency. No researchers to date, however, have been able to determine the medial-lateral shear force component using a pressure sensor platform. Those specifications that should be considered when selecting a system for measuring pressures include resolution, sampling frequency, reliability, and calibration. Resolution refers to both the size and number of sensors used in the system.6 The higher the resolution of the system, the greater the number of sensors. The size of the sensor is also important because different size sensors can alter the pressure reading, as pressure is dependent on both force and area. A force applied to a large sensor will not provide the same pressure reading as the same force applied over a small sensor. This is because the spatial resolution of the system is not high enough. For example, if a vertical force of 50 N were applied to a 1-cm2 sensor, the resulting pressure would be 500 kPa. If the same force of 50 N were applied to 4-cm2 sensor, however, the resulting pressure would be only 125 kPa. Considering the tremendous anatomical variations in the size of the metatarsal heads, hallux, and toes based on foot size, the resolution of the pressure measurement system becomes an important consideration for the clinician. Resolution becomes even more critical when assessing the plantar pressures in children with small foot sizes. Sampling frequency is an important factor in determining the temporal resolution of the system. Sampling frequency is the number of samples measured by each sensor per second and is recorded in cycles per second or hertz.6 Mittlemeier and Morlock20 examined the effect of plantar pressures obtained using 4 different sampling frequencies and reported that pressure data collected between 45 and 100 Hz were adequate for walking. Most commercially available systems (eg, Emed sensor platform, Pedar insole system, F-Scan system) offer sampling rates between 50 and 100 Hz. For higher-speed activities, such as running, sampling frequencies of 200 Hz or greater are often required.21 Reliability of the measurements obtained with the pressure sensor are critical for an accurate measurement. Hughes et al22 suggested that using the average of 3 to 5 walking trials enhances the reliability of the pressure measurement, although 100% replicability cannot be expected because of inherent differences in each walking trial. Several researchers22–24 have evaluated the reliability of measurements obtained for different sensor technologies used for both platform and in-shoe pressure measurement systems. Because they reported variations in the reliability of measurements obtained with the different systems available for measuring plantar pressures, it is critical for the clinician to be aware of the reliability (error) of the system he or she has selected for use. Calibration is important for establishing the validity of measurements of both force and Although a system may that have reliability, the measurements may not provide an accurate of the force or pressure acting on the plantar surface of the foot because the pressure values even may not be method for the sensors in both platform and insole systems is to either under a that is then with at known of The use of this of system each sensor to be loaded and permits the of a curve for each sensor or of sensors in a a patient on the insole or platform as a method of may not be because each sensor is not and sensors may not be loaded at data for sensors. pressures can be measured using a variety of and as well as by critical of these can be used as discrete sensors or to a matrix of multiple sensors. is important for the clinician to be aware of the associated with these to using for data collection. measurements pressure at specific anatomical on the plantar surface of the foot. Thus, the use of discrete the clinician to an a regarding the for data collection. the have been the are either in on the of the foot with or into an insole of similar Because only a small number of sensors are used at time, a for using discrete measurements is a higher sampling in to 200 samples per Thus, discrete measurements are often selected for activities such as or various Although discrete sensors are to use and be when using this method of pressure data collection. The discrete sensor can as a in the shoe, acting as an the as it were a the of between the used to the sensor and the can an which can to pressure values. the discrete sensors can from their during to shear at the Thus, the pressure values recorded may not the anatomical selected by the clinician. measurements use an of sensors in and an discrete sensor. Thus, matrix measurements can assess the of pressures acting over the entire plantar surface of the foot A when using a matrix measurement is that a is to the pressure In addition, a plantar surface area can be at The technology the use of was at the in between 2 of a were over a patient's foot to the the patient the would at a and from the would be into the The of the would an of the on the plantar surface of the foot with the highest This use of of the to provide a method of an assessment of in-shoe plantar pressures, but to the different of pressure were In addition, the of the the was and often when to the This of consists of a with patterns of small with the surface of each The is and then with When a is applied to the by the the most will be at the of highest pressure because the of the are by the applied and reported using this of in to the foot of available is the The of is for a of the of plantar pressure, but this of cannot be used to the magnitude of plantar The was to provide the clinician with a of the pressure over the plantar surface of the foot during standing or during The consists of a with a The is on each by A at 45 is the to provide a of the plantar surface of the foot. In to the patient's of pressure the as through the can be or on The provides the clinician with a and of but this not permit the of pressure values. and in the use of a for the measurement of plantar A consists of 2 of a by a or a The an and the 2 are when force is the between the to the between the the and the resulting in is a matrix of multiple in the Emed sensor platform and the Pedar insole system. Pressure measurement systems using a curve that is for each sensor in the matrix and permits the assessment of A of using a for in-shoe pressure measurement is that the sensor insole is 2 in comparison with other of sensors. The is a very with patterns on 2 with a between the 2 The to the of as the pressure between the This pressure between the the to The of using this of sensor technology can be either force or The force however, is vertical the technology in a matrix for both a platform and an in-shoe insole that are as the F-Scan system. The Musgrave footprint system, which is in the also a matrix of sensors for a platform. The necessary to use the critical for the measurement of plantar pressures consists of a a with force at each a and a for data The surface of the has multiple which the surface when pressure is the is the surface, the of the through the is are recorded by the and the magnitude of force applied to the surface is determined from the force on the and the forces the can determine the pressures acting on the plantar surface of the this system has been referred to as the and use with a clinical has been in by The consists of a discrete sensor in a which is into an When a is applied to the the applied force the of the The sensor the an as a result of this Because of the of the sensor, the has been to measure shear forces as well as vertical although further research is necessary to this of the the system this technology by into a technology permits the of of measurement include and The of these in to their are that they are available to the clinician and or to use. The of these systems is The of these is that they cannot be used to the magnitude of plantar Although the clinician can use these systems to of high pressure on the plantar surface of the foot and to the patient of pressure, they cannot be used to the pressure values. of include and the necessary for the use of the critical of these systems are the of pressures and the to specific regions on the plantar surface of the foot to determine pressure, force, and area. The of these systems from to over on the and analysis software with the system. Although the of pressure measurement systems use the various technologies for both their platform and in-shoe measurement specific associated with in-shoe platform data collection should be considered by the clinician when determining which method will be The of using a platform include a greater number of a higher resolution, and the that the pressure sensors are to the supporting surface to provide a vertical force measurement. The associated with using a platform or system for data collection include the large number of to data and the of the platform sensor surface by the The method for data using a platform system has been the The that the patient a at in while pressure data are collected from a foot contact over the sensor platform. Considering that have that pressure data from at 3 to 5 are to multiple walking trials the are for data collection. with diabetes and neuropathy be placed at when pressure data using the method because the numerous for the method can the of plantar In addition, patients with neurological may have the platform because of and In an to the associated with the using pressure data collected using the and for patients are at for plantar ulceration. In a et a method that was to the method in the of plantar pressures when using the method because the method pressure values that were more similar to obtained with the associated with platform measurements is the of the platform by the The that the patient has the walking that he or she can the foot in contact with the may result in of the patient's typical pressure The use of in-shoe data collection is to the of because the patient is to do is in-shoe data collection provides the clinician with information pressures the shoe, at the pressure measurement also permits the clinician to other functional activities, such as because the is the pressure measurement is important when assessing the effect of or foot to modify the pressures acting on the plantar surface of the foot. on the analysis of in-shoe pressure data, the clinician can modify the or to their to the Although in-shoe data collection would to be a for the there are associated with this Because the number of sensors that can be into the pressure sensor insole is the number of sensors used in a platform system, the resolution is The sensor are more to because the sensors to the computer can be or as they the sensors can also be by In addition, the and the can affect the reliability and validity of measurements of the the sensor insole can only measure force because of the of the insole sensor the to the supporting the measurement of vertical not during the initial and of the walking cycle. Although platform and in-shoe data collection both have and should their on the and functional of their patients as well as on the or they to Several illustrate how physical therapists have utilized plantar pressure measurements for the assessment and management of lower-extremity and foot disorders associated with the neurological, integumentary, and musculoskeletal systems. The effectiveness of has been the of plantar pressure in both adult and pediatric patients with neurological disorders. and have the effect of on the patterns of with The of these suggested that force, area, and impulse through the hindfoot, midfoot, and during contact with the supporting surface. et have reported using plantar pressure to determine the effectiveness of on the loading patterns of children with during walking. In these the use of plantar pressure the investigators in understanding how the various plantar regions of the foot were loaded with and without the use of plantar pressure the authors to which of were most effective in a more typical of foot loading during walking. In the by et the use of an in-shoe pressure measurement system also the and of data collection. Because their were children with and they used an in-shoe pressure system, the number of trials that would have been to measurements with a platform system while the children were walking was The of researchers plantar pressure measurements for musculoskeletal disorders of the lower and foot has been to the effect of foot and as well as various used in the clinic to the forefoot. case using in-shoe pressure measurement, have the effectiveness of and various used to foot to the plantar pressures acting beneath the forefoot. using platform pressure measurements have evaluated various of insole and and The information from these can be used to assist in determining the and amount of for foot as well as the amount of pressure that can be expected when using either or various of insole This information can also be used to assist in determining the most for managing patients with various musculoskeletal foot and ankle disorders. Most plantar pressure with disorders of the system. The for this is the of plantar surface in the of patients with diabetes and neuropathy also have plantar The of these have on the effect of to regions on the plantar surface of the and Because contact applied with little or has been to be an effective of plantar et the plantar pressures a contact and typical to that was not a factor in the pressures acting on the plantar surface of the foot. The information from these has with data regarding the effect of and contact in plantar pressures over plantar regions determined to have pressure values. plantar pressures have been shown to be of potential sites of ulceration. this information can be used by to the most treatment for each and the effect of different and ankle walking on plantar This was of the the of a patient's of walking to effect a in plantar pressures acting on the was pressures are a high for in patients with diabetes and Data obtained from a plantar pressure assessment can be used by the physical in the evaluation and management of adult and pediatric patients with a wide variety of foot and lower-extremity disorders associated with the neurological, integumentary, and musculoskeletal systems. the force platform, pressure systems measure only vertical force, but they provide the clinician or with information regarding the of various use of footwear, use of foot orthoses, gait and on forces and pressures applied to specific of the foot.
No takes yet. Share an insight, caveat, or question.
Orlin et al. (2000) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: