This is the authors' abstract. We don't add key points for this paper.
Polylactic acid (PLA) is an inherently brittle polymer, exhibiting a high Young's modulus and minimal elongation‐at‐break. To transition its failure mode to one that is much more ductile without loss in strength is challenging. A new strategy combining physical aging with ultraviolet (UV) radiation is carried out to reach the desired mechanical properties of PLA. Characterization of the modified resin is done by mechanical, rheological, and acoustic analysis. With the new processing strategy, the elongation‐at‐break of PLA increases from below 5% up to 18% by conditioning at −40 °C for 48 h followed by UV irradiation for 30 h. Correspondingly, results demonstrate that the yield strength and Young's modulus remain statistically unchanged. The interlocked entanglements inhibit the formation and evolution of subordered structures, which are attributed to the gained ductility. The high entanglement density and few subordered structures in the modified polymer system contribute to the unusual elongation‐at‐break without alteration of the modulus.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Zhao et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: