Answers are grounded in this paper and cite their sources.
Solid oxide fuel cells (SOFC) are high-temperature electrochemical devices that show promise for clean energy production by converting hydrogen and air into electrical power (fuel cell mode) and vice versa (electrolysis mode). The efficiency of the electrochemical reactions depends on the microstructure and the material properties of both the porous oxygen and hydrogen electrodes [1]. These materials are subject to extreme environments during operation at high temperatures and electric field polarization. Understanding changes in the electrode material itself can provide valuable insights into the long-term feasibility (e.g. stability / structural stability / performance) of solid oxide cells for industrial applications. Fuel cell materials have historically been challenging to analyze with atom probe tomography (APT) due to their porous nature and low yield. Analysis of perovskites has been enabled by use of a shorter wavelength laser pulse in the LEAP 6000XR series, providing higher yield compared to previous generations of instruments and making measurements of these materials routine [2]. In this work, we used APT to analyze a composite oxygen electrode made of lanthanum-doped strontium cobalt ferrite (LSCF) and ceria-doped gadolinium oxide (CGO). Atom probe tomography provides compositional information with near-atomic spatial resolution in three dimensions [3]. For this LSCF-CGO composite, a reference samples and a sample aged in electrolysis mode at 800 ◦C were analyzed. Figure 1a shows a scanning electron microscope (SEM) image of the interfaces between the electrode, CGO and LSCF phases, showing a high degree of porosity in the oxygen electrode. Figure 1b shows a 3D ion map image of the interface obtained with APT; the phase boundary is separated by a 22 at % (Fe, Co, Sr, La) isoconcentration surface. The proximity histogram [4] from the interface is shown in Figure 1c, showing the concentration gradients from the phase boundary into each distinct phase. In addition to the phase boundaries, several grain boundary features were observed in each phase. Figure 2a shows a 3D ion map from the aged sample, the purple and blue dots indicate the Fe and Co distributions, respectively. Figure 2b shows the 1-dimensional concentration profile from the region of interest shown by the blue rectangle in Figure 2b. The 1D profile shows enrichment of Fe, Co, La and Gd at the grain boundary. Notably, oxygen and Ce depletion are observed at the grain boundary. The oxygen depletion at grain boundaries is consistent with other APT studies of similar perovskite materials reported in the literature [5, 6]. This may indicate oxygen vacancy segregation which can inhibit proton transport, affecting the efficiency of the electrochemical reaction after aging. This segregation can indicate formation of a space charge layer that negatively impacts SOFC performance [7]. Atom probe tomography is one of the only techniques that can quantify grain boundary segregation in three dimensions, providing valuable insight into the structure-property relationship for porous fuel cell electrode materials. (a) SEM image of the sampled region of the CGO/LSCF boundary; (b) ion map with a 22 at % (Fe, Co, Sr, La) isoconcentration surface; (c) proximity histogram from the phase boundary indicating the composition in each phase. Error bars determined from counting statistics. (a). Ion map from aged sample, Gd, Fe, and Co ions displayed, (b), 1D concentration profile across the grain boundary.
No takes yet. Share an insight, caveat, or question.
Rice et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: