Answers are grounded in this paper and cite their sources.
Optimal performance in electron microscopy and microanalysis requires specimens and instrument environments that are free from hydrocarbon contamination while preserving intrinsic microstructural, chemical, and surface characteristics. Hydrocarbon residues may be introduced at multiple stages of specimen preparation and handling, including direct contact, chemical processing, use of adhesives or solvents, and backstreaming from oil-based vacuum systems. Even specimens prepared using best practices can act as persistent sources of contamination within microscope vacuum chambers, adversely affecting imaging quality and analytical reproducibility. In high-resolution field-emission scanning electron microscopy (FESEM), focused ion beam/scanning electron microscopy (FIB/SEM), critical-dimension SEM (CD-SEM), and transmission electron microscopy (TEM), hydrocarbon contamination remains a significant challenge [1,2]. Electron irradiation triggers beam-induced polymerization, creating carbonaceous deposits on irradiated surfaces. These deposits degrade image contrast and resolution, introduce dimensional inaccuracies, and compromise quantitative microanalytical techniques [3,4]. For both materials science and life sciences applications [5,6] —where interpretation often relies on subtle contrast mechanisms, nanoscale features, or beam-sensitive specimens—stringent contamination control is essential. Although approaches such as bake-out, solvent cleaning, ultraviolet-ozone treatment, cryogenic trapping, and component replacement have been employed to reduce hydrocarbon contamination, plasma-based cleaning minimizes mechanical abrasion, chemical disruption, and thermal stress by removing hydrocarbon contaminants through localized, non-contact surface reactions, making it particularly well suited for electron microscopy [7–9]. Oxygen-containing plasmas generated from ambient air or controlled O2/inert gas mixtures produce reactive species including ions, radical and UV photons that oxidize hydrocarbons into volatile by-products, primarily CO, CO2, and H2O, which are subsequently evacuated by the vacuum system [10,11]. For oxidation-sensitive, soft materials or biological specimens, hydrogen-based plasmas [12-15] provide a non-oxidizing alternative that can remove surface contaminants, reduce insulating films, and improve electrical conductivity without inducing oxidative damage. The effectiveness of plasma cleaning has been quantitatively demonstrated using quartz crystal microbalance measurements [16,17] and residual gas analysis [18] which show significant reductions in hydrocarbon load and improved vacuum stability. Nanoflight® SEM stop-action movies documented the plasma cleaning process as it occurred in a SEM [19] and quantitative measurements were taken to understand the contributions of line-of-sight and scattering of the reactive oxygen species to effective decontamination of complex interior surfaces of vacuum chambers and specimens [20]. Routine implementation of in situ or ex situ plasma cleaning protocols has been shown to improve microscope performance and data reliability across a range of materials and biological applications [21]. Reported benefits include reduced pump-down times, suppressed beam-induced contamination artifacts, enhanced spatial resolution, and improved stability during extended analytical measurements such as energy-dispersive X-ray spectroscopy (EDS), transmission Kikuchi diffraction (TKD), and electron backscatter diffraction (EBSD) [22,23]. Typical SEM/FIB plasma cleaning treatments performed at turbo-molecular pump pressures on the order of 10⁻²–10⁻³ Torr for durations of 2-10 minutes effectively restore low-contamination chamber conditions and facilitate rapid return to operational vacuum levels [24,25]. Delicate TEM samples of polymers or sections of biological material require short cleaning times of only seconds. Plasma cleaning is a critical enabling strategy for maintaining reproducible, high-quality microscopy and microanalysis in both materials science and life sciences research.
No takes yet. Share an insight, caveat, or question.
Armbruster et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: