Answers are grounded in this paper and cite their sources.
Nanocomposites with high volume fractions (15–50 vol%) of nanofibrillated cellulose (NFC) were prepared by impregnation of a wet porous NFC network with acetone/epoxy/amine solution. Infrared spectroscopy studies revealed a significant increase in curing rate of epoxy (EP) in the presence of NFC. The NFC provided extremely efficient reinforcement (at 15 vol%: 3-fold increase in stiffness and strength to 5.9 GPa and 109 MPa, respectively), and ductility was preserved. Besides, the glass transition temperature increased with increasing NFC content (from 68 °C in neat epoxy to 86 °C in 50 vol% composite). Most interestingly, the moisture sorption values were low and even comparable to neat epoxy for the 15 vol% NFC/EP. This material did not change mechanical properties at increased relative humidity (90% RH). Thus, NFC/EP provides a unique combination of high strength, modulus, ductility, and moisture stability for a cellulose-based biocomposite. Effects from nanostructural and interfacial tailoring are discussed.
No takes yet. Share an insight, caveat, or question.
Ansari et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: