Answers are grounded in this paper and cite their sources.
Copper ferrite nanoparticles loaded on montmorillonite (MMT−CuFe 2 O 4 ) were prepared by co‐precipitation method and applied as catalyst for activation of peroxymonosulfate (PMS) in degradation of reactive black 5 (RB5). The maximum removal efficiency of RB5 completely depends on the operating parameters and the highest removal percentage was obtained at MMT−CuFe 2 O 4 dosage of 250 mg/L, PMS concentration of 4 mM, initial RB5 concentration of 50 mg/L and time of 15 min. The presence of anions such as Cl − , NO 3 − , HCO 3 − , and SO 4 2− showed a significant limitation in the degradation of RB5 in the MMT−CuFe 2 O 4 /PMS system. Trapping experiments showed that ⋅OH and SO 4 ⋅ − radicals were involved in the catalytic degradation of RB5, however ⋅OH is the major specie in the catalysis system. Consecutive cycles were considered for testing the reusability of MMT−CuFe 2 O 4 ; its results showed the stability of five consecutive cycles. The toxicity test was evaluated using Daphnia magna and the results illustrated a substantial drop in the toxicity of the solution treated. The significant reduction of TOC during RB5 degradation and the production of SO 4 2− , NH 4 + and NO 3 − confirm the proper progress of pollutant mineralization. The high catalytic performance of the catalyst in a short time compared to other removal systems emphasizes that MMT−CuFe 2 O 4 can be suggested as a promising catalyst for the degradation of RB5 from aqueous solutions.
No takes yet. Share an insight, caveat, or question.
Rezaei et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: