Answers are grounded in this paper and cite their sources.
Biogas is among the renewable and sustainable energy sources that could overcome the problems associated with conventional energy sources. The presence of impurities such as hydrogen sulfide, which harm biogas user's purification, is a major concern. Soda ash from Lake Natron was used for the desulfurization of raw biogas; it was ground and sieved to obtain particle sizes of 280 and 400 μm. The adsorbent mass was varied (25 g, 50 g, and 75 g), and gas flow rates were (0.03 m3/h and 0.04 m3/h). The Nitrogen adsorption-desorption isotherms, pore size distribution, and multipoint BET surface area were determined. The Zeiss Ultra Plus Field Emission Scanning Electron Microscopy (FE-SEM) characterized surface morphology. The sample sieved at 280 μm packed with a mass of 75 g, and a flow rate of 0.03 m3/h showed a removal efficiency of 94% with a sorption capacity of 0.02g/100g. The spent sample was successfully regenerated for 1, 5, and 7 days, where 7 days of exposure showed the highest removal efficiency of 90%. The sorption capacity was 0.01g/100g at the breakthrough time with five cycles. This is the first study to demonstrate the application of soda ash for biogas purification. The high removal efficiency, sorption capacity obtained, and regenerative ability make the soda ash sorbent a promising material for biogas purification.
No takes yet. Share an insight, caveat, or question.
Mrosso et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: