Answers are grounded in this paper and cite their sources.
A flow-injection system for multielemental analysis with a mercury(II) preconcentration step using a resin Chelite-S® (Serva Feinbiochemica Heidelberg, Part No. 41709) packed minicolumn by inductively coupled plasma atomic emission spectroscopy is described. A mercury reductive elution procedure with a mixture of SnCl2/HCl was used, which allows use of 6 mol/L HCl solution instead of concentrated hydrochoric acid. The main parameters related to ICP operation, such as radio frequency power (950–1750 W), auxiliary argon flow (0.0–1.5 L/min) and spray chamber nebulizer pressure (15–35 psi), were studied. Optimization of the FIA system was reached by defining the best eluent carrier stream (1.4–2.8 mL/min), Hg° carrier stream (10–40 mL min−1), loading time (0.5–4.0 min), sample flow rate (1.25–10.0 mL/min), temperature of reactor gas–liquid separator (GLS) (25–75°C) and eluent volume (50–350 µL). Throughput is around 30 samples per hour for analytical solutions within the range 50–2500 ng Hg(II)/L. Results from certified material showed good precision (RSD <3%, n = 12) and no statistical difference was observed for real samples analyzed by AAS and by the proposed system.
No takes yet. Share an insight, caveat, or question.
Zara et al. (2003) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: