This is the authors' abstract. We don't add key points for this paper.
This paper presents a metasurface filtering antenna based on unequal rectangular patch elements. The design is implemented with only two dielectric layers: the upper PCB carries the metasurface radiator, and the lower PCB supports a Y-shaped microstrip feeding network. A radiation null near 3.3 GHz is obtained by dividing the four corner units of the metasurface into 2 × 2 subarrays, which reshapes the current paths around the central aperture and causes destructive spatial radiation. For the upper stopband, a second null appears at 3.84 GHz because the fields coupled from the opposite-phase currents on the Y-shaped feed branches cancel in the far field. Measurements indicate that the antenna provides a 10 dB impedance bandwidth of 3.43–3.60 GHz, or 9.85% in fractional bandwidth. Within the passband, the measured average realized gain reaches 7.51 dBi. The lower and upper stopbands exhibit radiation suppression levels of 15.61 dB and 14.08 dB, respectively. The boresight cross-polarized field is also more than 20 dB below the co-polarized field, confirming satisfactory radiation quality. These results make the proposed antenna suitable for compact 5G front-end integration. The proposed design provides a balanced combination of low profile, compact aperture, measured gain, and two band-edge radiation nulls.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: