Answers are grounded in this paper and cite their sources.
The aim of the present work is to investigate the influence of solidification thermal parameters on the microstructural array of Al 5 wt.% Cu and Al 9 wt.% Si alloys castings with a view to developing correlations between the as-cast dendritic microstructure, the electrochemical corrosion resistance and the tensile mechanical strength. Considering the as-cast Al 5 wt.% Cu alloy, it was found that smaller secondary dendrite arm spacings (λ2) increase both the ultimate tensile strength (UTS) and the corrosion resistance. For the Al 9 wt.% Si alloy, it is shown that the UTS also increase with the decrease in λ2, however, the corrosion resistance decreases. A combined plot of corrosion resistance and UTS as a function of λ2 is proposed with a view to determining an optimum range of secondary dendrite arm spacings which provides good balance between both properties.
No takes yet. Share an insight, caveat, or question.
Osório et al. (2011) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: