Answers are grounded in this paper and cite their sources.
This study focused on the determination of formaldehyde emission concentration levels of some selected buildings in Rumuolumeni Community, Obio-Akpor Local Government Area of Rivers State, and lies on latitude 4o 65’ 44’’ north and longitude 6o 35’ 51’’ east. 10 buildings (five painted and five unpainted buildings) at different locations within Rumuolumeni Community were selected for the study. A formaldehyde concentration monitor was positioned 1.5 meters above the floor of each of the selected buildings to determine the formaldehyde concentration levels every 30 minutes intervals for three hours daily, for a period of two weeks. The geographical locations, indoor relative humidity, and temperature of the selected buildings for the period under study were also taken. The mean values of 0.022 ppm, 0.036 ppm, 0.043 ppm, 0.048 ppm, 0.057 ppm, 0.058 ppm and 0.060 ppm of formaldehyde concentration levels emitted by the selected painted and unpainted buildings for the period under study did not exceed the permissible limits of 0.08 ppm and 0.1 ppm established by WHO and NIOSH respectively. Similarly, the measured values of formaldehyde concentration did not exceed the recommended levels permitted by OSHA and the American Conference of Industrial hygienists of 2 ppm, 0.75 ppm, and 0.3 ppm respectively. However, these values were higher than U.S. NIOSH “recommended time-weighted average exposure limit of 0.016 ppm for workplaces”, and the ATSDR established “chronic inhalation minimal risk level (MRL) of 0.003 ppm (0.004 milligrams per cubic meter, mg/m3 ) based on respiratory effects in humans”.
No takes yet. Share an insight, caveat, or question.
J. et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: