Answers are grounded in this paper and cite their sources.
p-n Cu(2)O homojunction solar cells were electrochemically fabricated by consecutively depositing an n-Cu(2)O layer on a p-Cu(2)O layer. In order to better understand the Fermi levels of the electrochemically grown polycrystalline p- and n-Cu(2)O layers and maximize the overall cell performance, the back and front contacts of the Cu(2)O homojunction cells were systematically changed and the I-V characteristics of the resulting cells were examined. The result shows that the intrinsic doping levels of the electrochemically prepared p-Cu(2)O and n-Cu(2)O layers are very low and they made almost Ohmic junctions with Cu metal with which previously studied p-Cu(2)O layers prepared by thermal oxidation of Cu foils are known to form Schottky junctions. The best cell performance (an η of 1.06%, a V(OC) of 0.621 V, an I(SC) of 4.07 mA cm(-2), and a fill factor (ff) of 42%) was obtained when the p-Cu(2)O layer was deposited on a commercially available ITO substrate as the back contact and a sputter deposited ITO layer was used as the front contact on the n-Cu(2)O layer. The unique features of the p-n Cu(2)O homojunction solar cell are discussed in comparison with other Cu(2)O-based heterojunction solar cells.
No takes yet. Share an insight, caveat, or question.
McShane et al. (2012) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: