Answers are grounded in this paper and cite their sources.
A 6.78-MHz multiple-transmitter (TX) wireless power transfer (WPT) system was presented. An adaptive magnetic field adder (AMFA) IC was proposed, for the first time, to enable the maximization of the system efficiency (η SYS) by adaptively optimizing the amplitude and phase of the current in each TX coil on the basis of the coupling coefficient (k) between each TX coil and the receiver (RX) coil. Under the optimal condition, the current in each TX coil is proportional tokbetween the TX coil and the RX coil. For the independent control of the current in each TX coil, a selectively activated shared-half-bridge (HB) power amplifier (PA) together with an alternate TX coil array was proposed. To sense a smallk, duty-ratio control was proposed in the integratedksensor. The AMFA IC was fabricated by a 0.18-μ mCMOS process with 1.8-V devices. The peak power conversion efficiency of the proposed PA reached 74%. Theksensor could accurately measurekwith a percentage error within ±2.5%. A WPT system consisting of a4× 4TX coil array driven by four AMFA ICs and a single RX coil was implemented. Experimental results showed that, compared with the conventional system,η SYSwas increased from 0.11% to 51% with a load power of 576 mW when the RX coil was perpendicular to the TX coils. When the RX coil was parallel to the TX coils, aη SYSof 63%, which is higher than those in previous works, was also achieved.
No takes yet. Share an insight, caveat, or question.
Qiu et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: