Answers are grounded in this paper and cite their sources.
This study focuses attention on the relation between the glass transition temperature, T g , of the amorphous phase of semicrystalline polymers and the morphological state of the polymer. By use of dynamic mechanical and thermal distortion tests, the influence of stereospecificity; crystallinity; and, orientation in the absence and presence of crystallinity, has been assessed for crystallizable polystyrene (CPS). These results, together with some analogous data on crystallizable polypropylene (CPP), are compared to published information on other polymers. Studies of quenched, oriented CPS by thermal distortion tests under load indicate that the retractive stress and external load are the prime factors in determining the glass temperature as measured by this type of test. The influence of T g of the configurational state, sorted out from the other two factors, is shown to be small. For CPS, an increase in T g of 5–15°C., depending on the method of test, is observed to accompany crystallization. An increase of 15–25°C. in T g , relative to amorphous CPS, is noted for samples annealed in the stretched condition. The combined effect of crystallinity and orientation is significantly greater than the sum of the individual effects; a mechanism is postulated for this synergistic behavior. The breadth of the transition of oriented, annealed samples appears to depend on the direction of test relative to the direction of stretch. Stereo‐specificity in polystyrene and polypropylene appears to have a negligible influence on T g .
No takes yet. Share an insight, caveat, or question.
Newman et al. (1960) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: